ماژول کنترل دما و رطوبت دیجیتال مدل XH-M452

ماژول کنترل دما و رطوبت دیجیتال مدل XH-M452 همراه با رله با ولتاژ 12 ولت راه اندازی می شود. رنج دمایی این ماژول -40 تا 120 در جه می باشد. از این ماژول می توان در محیط های گلخانه ای و همچنین در دستگاه های جوجه کشی استفاده کرد.

• Application scenario: control cabinet constant temperature and humidity control, incubation and breeding temperature control, printing plant.
• The two relays are separately controlled, one way to control the temperature, another way to control the humidity.
• If you do wrong operation ,it will return to detect temperature display automatically after 5 seconds .
• Set the temperature - : Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key to set value.
• Restore the factory Settings: At the same time long press temperature, and humidity + key for 3 seconds, digital display, 888, 888.

Specification:
Output: 10A delay
Power Supply: DC 12V
Size: 65mm*55mm*28mm
Humidity Range:0~100%RH
Test Probe: Integrated sensor
Controller Precision:0.1℃ 0.1%RH
Temperature Measurement Range: -40℃~120℃

Instructions for use:
1. Set the temperature (+): Normal display mode, long press the (+) key for 3 seconds, start temperature numerical flashing, press the + / - key setting values.
Incorrect operation after 5 seconds, automatically return to detect temperature display .
2. Set the temperature (-): Normal display mode, long press (-) button for 3 seconds, stop numerical flashing temperature, press the + / - key set value .
3. Restore the factory settings: At the same time long press temperature, and humidity (+) key for 3 seconds, digital display is 888888 .
4. Set the start temperature: Long press the (+) key, start the flashing temperature, set start temperature by + / - key .
5. Set stop temperature: Long press (-) button, stop flashing temperature, set stop temperature by + / - key .
6. Set to start humidity: Long press the (+) key, start the humidity value flashing, set by + / - key launch humidity value .
7. Set stop humidity: long press (-) to stop humidity value, set by + / - key to stop the humidity value.

Note: When setting the mode, if the set temperature value setting is reversed, the output indicator will not light and the load will not work.

Package Included:
1 x XH-M452 Thermostat Temperature Humidity Control Thermometer Hygrometer Controller Module Dual Output DC 12V LED Digital Display